UCLA Library > Digital Collections > David Livingstone > Letter from Bambarre            

Livingstone's Letter from Bambarre

A Multispectral Critical Edition

All letter images and text published by permission of Peter and Nejma Beard. Licensed for use under the Creative Commons Attribution-Noncommercial 3.0 Unported License. ©2010

*Beta Edition, 2010
*First Edition, 2011

Spectrally Imaging Livingstone's Letter
In writing his letter to Waller, Livingstone used two pages from a proof copy of the Proceedings of the Royal Geographical Society (see Note on the Text). He first wrote across the back of each sheet (1r and 2r), then across the side with the printed text (1v and 2v). In covering this latter side, he began by filling the top, left, and bottom margins, then turned the sheet ninety degrees clockwise and wrote in the remaining margin. Finally, without again turning the sheet, he wrote across the printed text, so that his "overtext" ran perpendicular to the print.
Figure 3.1. A portion of 1r showing Livingstone’s text and bleedthrough from 1v. Figure 3.2. A portion of 2v showing Livingstone’s overtext, the printed undertext of the Proceedings, and bleedthrough from 2r.
Due to the paper used and Livingstone’s overtext, the letter to Waller is today very difficult to read. Where Livingstone’s iron gall ink has bled through the page, two layers of text run into one another, while on the portions of the page with printed text (or with the handwritten address to Livingstone), three superimposed layers of text are often visible. 
Although problematic for the Livingstone scholar, these characteristics – in addition to the fact that the letter contains three types of ink (Livingstone’s, that of the printed text, and that of the handwritten address to Livingstone) – made the letter of great interest to the imaging team. The team recognized that the letter offered the chance to use the multispectral imaging and processing techniques developed to separate the "overtext" and "undertext" in the Archimedes Palimpsest, a medieval parchment-based document, for the study of a nineteenth-century paper-based document. Furthermore, the letter’s physical characteristics – such as the stains (most evident on 1r and 1v), the seal (on 2v), and the creases on each page where the letter had been folded – also presented an opportunity for innovative imaging and processing. 
The letter was transported from the Conservation Department at the Metropolitan Museum of Art in New York to the imaging lab at the Walters Art Museum in Baltimore, Maryland by a three-person team. At the Walters, in order to spectrally image the letter, the imaging team used a fully integrated spectral imaging system that included a 39-megapixel Megavision monochrome camera along with a low-heat spectral illumination system from Equipoise Imaging. This system illuminated each leaf with light-emitting diodes (LED) in various spectral bands, with each spectral band captured by the camera in a series of registered monochrome images so that a given point on every image lined up.
Figure 3.3. Project Director Adrian S. Wisnicki examines the letter and capture station just before imaging begins. Figure 3.4. Imaging Specialist Janet Safford (left), Imaging Scientist Bill Christens-Barry (at computer), and Program Manager Mike Toth (foreground) review the captured images.
Although the Archimedes Palimpsest Project captured images at thirteen different wavelengths, for the Livingstone letter the imaging team increased this number to twenty-three. This number included images produced by standard multispectral imaging as well as by "raking light," i.e., with illumination at a low oblique angle to the paper to discern surface variance. The team also used an experimental "color wheel" with filters to capture UV fluorescence from the manuscript leaves for later processing. The captured images include the following spectra and illuminations:
Band = Wavelength in nanometers
01 = 365 (UV)
02 = 450
03 = 470
04 = 505
05 = 535
06 = 570
07 = 615
08 = 630
09 = 700 (near IR)
10 = 735 (near IR)
11 = 780 (near IR)
12 = 870 (near IR)
13 = 940 (near IR)
14 = 940RR (IR raking right)
15 = 470RR (blue raking right)
16 = 940RL (IR raking left)
17 = 470RL (blue raking left)
18 = UVR (UV illumination, red filter)
19 = UVG (UV illumination, green filter)
20 = UVB (UV illumination, blue filter)
21 = 450R (blue illumination, red filter)
22 = 450G (blue illumination, green filter)
23 = 450B (blue illumination, blue filter)

Figure 3.5. The letter as illuminated by the following wavelengths: 470 (blue), 535 (green), 570 (yellow), 630 (red).

These images, which totaled 13 GB as raw images, were stored as smaller archival TIFFs on external drives and distributed to members of the team for processing and further study. The full high-resolution data set will eventually be made available.
Image Processing